Model No.: CARX
CARX flange end composite exhaust Control Valve ( vent valve)
Compound CARX exhaust valve body for the drum-shaped, valve parts, including stainless steel ball, lever valve. This valve is installed in the pump outlet or the Transmission and Distribution in the water pipeline, used to exclude the air, set the plot in the tube in order to improve efficiency in the use of pipelines and pumps, an officer within the negative pressure, the valve quickly inhaling outside air to prevent pipeline damage due to negative pressure. Water when the tube normal transport, if a small amount of air gathering to a considerable extent in the valve and valve, the water level dropped, then the air discharged from the holes. When the pump stops, the water is empty or the case of tube in tube negative pressure, race head quickly turned on the air inhaled, to ensure pipeline safety.
Main technical parameters:
Nominal pressure: 1.0 ~ 1.6MPa
Nominal pass through: DN25-32mm threaded connection
Flange connection of DN50-200mm
Suitable medium: water, oil, corrosive fluids
Suitable temperature: 0 ~ 100 ° C
Flange Standard: GB/T17241.6 GB / T-9113
Test standard: GB / T 13927 the AP contributed most to the success of the performance today.